P0327: Knock sensor, bank 1, sensor 1: low signal
System: ignition and misfire
What the code means
Knock sensor, bank 1, sensor 1: low signal. The signal is below the lowest possible value. Usually a short to ground or an open circuit in the wiring, or a failed part.
What this part does
A microphone on the engine block that hears detonation (knock). The engine computer then retards ignition to protect the engine.
Symptoms
- Loss of power, slower acceleration
- Higher fuel consumption
- Sometimes audible knocking
Common causes
- Damaged wiring or connector
- Loose or failed sensor
- Real knock from poor fuel
Can I keep driving?
Usually yes. The car keeps driving normally, but fix it soon: it can raise fuel consumption, and while the check engine light is on you will not notice new faults.
How to find the cause
Read the code with an ELM327 adapter and the AI ELM app. It shows the freeze frame (engine conditions when the fault happened) and live sensor data, and the AI explains what to check first on your car.
Meanings follow the SAE J2012 standard shared by most cars since 2001 (1996 in the US). Some makes use a number differently, and codes starting with P1, B1, C1 or U1 belong to the manufacturer.
