AI ELM
All fault codes › P0107

P0107: Intake manifold pressure sensor: low signal

System: fuel and air metering

What the code means

Intake manifold pressure sensor: low signal. The signal is below the lowest possible value. Usually a short to ground or an open circuit in the wiring, or a failed part.

What this part does

Measures pressure (vacuum or boost) in the intake manifold, which tells the engine computer how loaded the engine is.

Symptoms

  • Poor acceleration or loss of power
  • Rough idle
  • Higher fuel consumption
  • Hard starting

Common causes

  • Cracked or disconnected vacuum hose to the sensor
  • Clogged sensor port (oil, soot)
  • Damaged wiring or connector
  • Failed sensor

Can I keep driving?

Carefully and not for long. Drive gently and get it checked soon: the engine or gearbox may lose power or switch to limp mode.

How to find the cause

Read the code with an ELM327 adapter and the AI ELM app. It shows the freeze frame (engine conditions when the fault happened) and live sensor data, and the AI explains what to check first on your car.

Google PlayApp Store

Meanings follow the SAE J2012 standard shared by most cars since 2001 (1996 in the US). Some makes use a number differently, and codes starting with P1, B1, C1 or U1 belong to the manufacturer.