P0108: Intake manifold pressure sensor: high signal
System: fuel and air metering
What the code means
Intake manifold pressure sensor: high signal. The signal is above the highest possible value. Usually an open circuit, a short to the supply voltage or a failed part.
What this part does
Measures pressure (vacuum or boost) in the intake manifold, which tells the engine computer how loaded the engine is.
Symptoms
- Poor acceleration or loss of power
- Rough idle
- Higher fuel consumption
- Hard starting
Common causes
- Cracked or disconnected vacuum hose to the sensor
- Clogged sensor port (oil, soot)
- Damaged wiring or connector
- Failed sensor
Can I keep driving?
Carefully and not for long. Drive gently and get it checked soon: the engine or gearbox may lose power or switch to limp mode.
How to find the cause
Read the code with an ELM327 adapter and the AI ELM app. It shows the freeze frame (engine conditions when the fault happened) and live sensor data, and the AI explains what to check first on your car.
Meanings follow the SAE J2012 standard shared by most cars since 2001 (1996 in the US). Some makes use a number differently, and codes starting with P1, B1, C1 or U1 belong to the manufacturer.
